Online Instruction Manual 1479-V by Tanita |
|
The following instructions are reproduced word for word from the original instructions that were included with scales that we received from the manufacturer in early November 2003.
HOW TO USE
- Place the unit on a flat, even surface and keep horizontal.
- Press the "ON/TARE" switch. "8888" will be displayed. After approximately 2 seconds, the display will change to "0.0". The unit is then ready to use.
- Place the object to be weighed on the weighing tray. The display will indicate the weight of the object. If the weight exceeds the unit's maximum capacity, the letters "EEEE" will be displayed, indicating an overload.
- TARE Function
While the scale is on, place the container to be tared on the weighing tray. The display will indicate the weight of the container. Press the "ON/TARE" switch and the display will then indicate "0.0". When an object to be weighed is placed in the container, only the weight of the object will be displayed. Additional objects can be weighed individually by pressing the "ON/TARE" switch each time and returning the display to "0.0". This can be continued until the maximum weighing capacity has been reached. - Auto Power Off
If weighing has been completed and the weight on the scale has not changed for three minutes, the scale will automatically switch off, to save battery life. - Battery Replacement
If the display indicates "LO", press the "OFF" switch and replace the batteries.
WARNING
The unit may not display "0.0" if a heavy weight of more than 100g is placed on the weighing tray or if the unit receives a hard shock. In this case, press the "ON/TARE" switch, check that the unit displays "0.0" and weigh again. If the scale will not be used for a long time, store with the batteries removed. If not, battery leakage may occur, damaging the unit.
CAUTIONS
This scale is a precision instrument and must be used under certain conditions to ensure accurate measurement. Please observe the following when using this scale.- Never disassemble the unit.
- Use in a vibration-free location that is not exposed to direct sunlight.
- The scale will not measure accurately in an environment subject to large temperature changes. The unit takes approximately two hours to adjust to such changes.
- Keep water and chemicals off the scale. Wipe with a damp cloth from time to time.
- Do not use or store near heat sources (ovens, heaters, etc.). (Optimum operating temperature 59-77F/15-25C)
- If not using for a long time, remove the batteries and store the unit in a dry, dust-free location.
- Check and replace batteries before sending the unit for repair. If repair is necessary, remove the batteries, repack the unit in the original carton and protect with packing materials before shipment.
- Do not leave objects on the weighing tray when the scale is not in use.
|
Affiliate Program | Frequently Asked Questions | Home All text, photos and graphics within Digital Scales.net are the property of Digital Traffic Net and may not be reproduced without permission. |
|