Online Instruction Manual
FX-100 by Gram Precision |
|
The following instructions are reproduced word for word from the original english instructions that were included with scales that we received from the manufacturer in late October 2003. The original also included Dutch, French, German, Italian, Norwegian, Portuguese, Russian and Spanish translations... I don't have the time!
Thank you for purchasing this quality precision weighing instrument. Please use the following instructions for optimum results.
 Operating Instructions FX-100 Overdrive
Batteries:
The FX-100 Pocket Overdrive scale uses two AAA batteries. To install simply remove the battery case cover and insert the battery with the negative (-) side of the battery in contact with the spring. Replace the battery case cover and you are ready to start weighing! Please note, do not use excessive force in either removing or replacing the battery cover.
Weighing:
- Always let the scale warm up for 20 seconds or so after turning on, before using.
- Turn the scale on by pressing the ON key.
- As the scale turns on, the display will appear for 2 seconds, and will set itself to zero.
- To change the readout of the scale between grams (g) and ounces (oz), use the slide switch located in the bottom of the scale.
- Do not place more than the capacity of the scale on the weighing platform or the scale will read E. If the capacity of the scale is exceeded too many times, it may become damaged permanently: This is considered abuse, and is not covered by the warranty.
- To reset the scale to zero to accomodate the scoop (protective cover) or another weighing container, put the scoop on the weighing platform, wait for the readout to stabilize, and press the ON/ZERO/OFF key. The other way is to place the scoop on the platform before turning the scale on and it will read zero automatically.
- If the weighing container is removed after being zeroed, the scale will read a negative value. Press the ON/ZERO/OFF key again to return the scale readout to zero.
- This scale has an auto-off function. If no activity takes place with the scale, the scale will turn itself off after approximately 30 seconds.
Note: As this scale is an accurate electronic instrument, please avoid vibrations, strong electrical or magnetic fields, or rapid changes in humidity or temperature when weighing.
|
Affiliate Program | Frequently Asked Questions | Home
All text, photos and graphics within Digital Scales.net are the property
of Digital Traffic Net and may not be reproduced without permission.
|
|
